This easy-to-make wooden obelisk will look really nice in your garden. First of all, I must tell you that I am by no means a professional carpenter or woodworker. So if I can build this, you can too. I'm including step-by-step directions and a diagram so that you can make one too at very little cost.
How to make your own DIY Wooden Garden Obelisk
Back in January, I was browsing through the How-To books in Lowe's and spotted an obelisk. I had seen these around but had no idea it had such a fancy name. By definition, an obelisk is a tall, 4 sided, narrow, tapering structure which ends in a pyramid-like shape at the top.I'm just going to call it a wooden trellis that you can grow things on in the garden.
What you need to build a Wooden Obelisk
As I mentioned earlier, if I can build this wooden obelisk, I'm confident you can.
- four 2"x 2"x 8' pieces of treated wood
- three 2"x 1"x 8' pieces of treated wood
- 1 small box of 2" coated deck screws
- drill and bit
- power or hand saw
- tape measure
- pencil
- a long work bench or 2 sawbucks
How to build a Wooden Obelisk
Learn how to build this garden wood obelisk with my step-by-step instructions, detailed pictures, and printable diagram.
Step 1
Cut the 2"x 1" slats into the following lengths:
- four 22" pieces
- four 18 ½" pieces
- four 14 ½" pieces
- four 11" pieces
Step 2
Drill a small hole ½ inch from both ends of each piece. This will keep the wood from splitting when you insert the screws later.
Step 3
Lay down two of the 2"x 2"x 8' pieces on your work space, placing them into a pyramid shape.
Step 4
Screwing the 12" slats from the bottom to the top of the obelisk.
- Screw a 22" slat 12 inches up from the bottom on both sides
- Screw a 18 ½" slat up 15 inches up from where you put the first slat.
- Screw a 14 ½" will go up 15 inches from that one
- Screw a 11" slat will go up 15 inches also.
I think you get the idea. The first slat is 12" from the bottom and the remaining slats are spaced 15" apart.
Repeat the process and build one more just like it.
Save the diagram here.
Important Tip
While you're screwing in these side slats, it's important to have someone hold the top of the pyramid together.
Step 5
After you have two sides, stand them up, have someone hold the tops together, and screw in the remaining slats. You will now have a 4 sided structure.
Step 6
To finish off the top, I chose to just trim it out with four small pieces of the 2"x 1" slats. I put this old birdhouse on the top just to get an idea of what I wanted to do. You may want to put a decorative finial on the top, but we're going to put birdhouses on the top of ours.
Obelisk Variations
As you can see in this photo, I experimented with different ways to make the obelisk more sturdy. I doubled the 2"x 2"s and later I built another one using 2" x4"s. But really the 2"x 2"s work just fine.
Painting our Obelisks
You may choose to leave them a natural wood color, but we decided to paint ours to add some more color to the garden.
First, we put a coat of a good quality exterior latex primer on them. After all, I don't want to have to be painting these things every year since painting is one of my least favorite things.
We chose to paint them what has become Cottage at the Crossroads signature shade of green (Bella Mint by Valspar.) We've painted our Adirondack chairs, an arbor, picnic table, and some exterior doors this same shade of green. I'm planning on planting an indeterminate cherry tomato under this one because they can get very tall.
I got a little carried away and built four obelisks and had to decide where to place them in the garden. I think we'll plant some pole beans under two of them and perhaps a flowering vine under one. I'll leave that monumental decision up to my full time decorator, Jane!
This year, we're concentrating on not only having a fully productive vegetable garden but an attractive sanctuary as well.You know, a place to enjoy the great outdoors with a glass of wine.
You may want to choose how you're going to anchor the obelisk. I bought some stakes at Lowe's. Jane and I are now shopping for some attractive birdhouses. Stay tuned to this blog to see the finished product which will include the birdhouses and the climbing plants.
If you decide to build an obelisk, let me know how it turns out.
Update: This post has been updated to correct a mistake made in the original materials list. We apologize for any inconvenience.
